10 Best Headphone Plug Extraction Tool 2022

After hours of researching and comparing all models on the market, we find out the Best Headphone Plug Extraction Tool of 2022. Check our ranking below.

Rank No. 1
Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • 🛠️Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
  • 🛠️Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
  • 🛠️Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
  • 🛠️Tep: This set of headphone jack remover tool is considered a single-use tool.
  • 🛠️If you have any question, please feel free to contact us by email.
SaleRank No. 2
Upgrated to Version 2.0 - Headphone Jack Removal Tool - Headphone Plug Extraction Tool, Tubes of Different Thickness, Jack Remover
  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover. Use the same method as above.
  • GUARANTEES: This set of headphone removal tool is considered a SINGLE-USE tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us. You will get a FULL REFUND without return..
  • COMES WITH SMALL GIFT: The 3 in 1 mini screwdriver in the package is a gift for your support on my small business. It includes 1.7mm Flat head mini screwdriver, 1.7mm Phillips mini screwdriver and 2.5 mm bolt remover. It is portable and can be used to disassemble glasses and watches and some other electronic products. Hope you like it!
Rank No. 3
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover-6 Pack Custom Stainless Metal Tube
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return.
  • ✔️USE WITH CAUTION: Inserting too far may damage the device. The pointed end of the tube is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
  • ✔️GIFT: The headphone jack cleaning brush in the package is a gift.
Rank No. 4
GripStick Headphone Plug Extraction Tool
  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool.
  • FIX YOUR AUDIO: The cylindrical shape allows the tool to be inserted in between the jack housing and the broken piece, physically isolating the piece from any friction against the jack walls. At the same time the split in the cylinder allows for manufacturing differences and acts as a kind of cylindrical pliers to grip the broken piece. This tool is designed for repair professionals, and will pay for itself with the repair of a single device. With careful use it can survive to repair many device
  • HOW TO USE IT: Shake off any loose pieces from the broken headphone plug that may fall off the jack. Push the GripStick into the device by hand. If it does not work, try to lightly/slowly tap it in. It should go in about the same length of a headphone plug. Don't push it in too far as it could bend the tip. If your plug broke in such a way it left the cylindrical metal shell inside the jack, the GripStick must not get caught on the inside of the cylinder shell, as it will never work if it does.
  • KEEP IN MIND: When pulling the GripStick out, try pinching the GripStick with your fingers as you pull. This will help grip the broken piece and pull it out. Pinch the GripStick closest to the device as possible. If this does not work, you may need to use a pair of pliers (preferably needlenose) and grip and pinch, again closest to the device as possible, as you slowly pull out. In some devices you may have to pinch with significant pressure.
  • NOTE: If the GripStick bends that should be fine as long as you make sure it is in all the way. Depending on how the headphone plug was broken off in the device, it may not be possible to be removed without disassembling the device and therefore the GripStick would not work in that situation. Also, please note that the jack connectors inside your device may have been damaged when the plug was initially broken off and even if the broken piece is taken out, the headphone jack may still be damaged.
Rank No. 5
JUYEER Headphone Plug Extraction Tool - Customized Metal Tube Grip Stick Puller, Headphone Tip Removal Tool with Headphone Hole Cleaning Brush
  • ✔️If this doesn't solve your problem, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.
  • ✔️PURPOSE: JUYEER headphone plug extraction tool is built specifically to easily remove broken 3.5mm headphone plugs from jacks. It can be used on 3.5mm jacks found on phones, laptops and any other devices. You can solve your problem within 20 seconds.
  • ✔️HOW TO USE: Insert the steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • ✔️GUARANTEES: This tool considered to be a single-use tool. But if you can’t solve your problem with this tool, you can take a picture and send that to us. And then you can get a full refund without a return.
  • ✔️Dear customers, the breakage of each earphone plug is different. We can't guarantee that this tool is suitable for all cases. Before you use this tool, please read the instructions carefully. Because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough because the headphone hole is 0.55 inch deep. Then squeeze the end of the metal tube and pull it out.
Rank No. 6
Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover ,Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices 6 PCS
  • Applicable To :all models of mobile phones, pads and computers headphone jack, built to easily remove broken 3.5mm headphone plugs from jacks.
  • Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
  • Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small,You need to plug it in deep enough.
  • Tep: This set of headphone jack remover tool is considered a single-use tool.
  • If you have any question, please feel free to contact us by email.
Rank No. 7
AOYUTC Metal Tube Headphone Plug Extraction Tool- Headphone Tip Removal Tool,Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • Applicable To :all models of mobile phones, pads and computers headphone jack, is built to easily remove broken 3.5mm headphone plugs from jacks.
  • Instructions: Insert the steel tube between the headphone jack and a broken plug. Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the steel tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with another one headphone jack remover.
  • Before you use this tool: please read the instructions carefully. because the gap between the earphone plug and the earphone hole is very small, we have made the wall thickness of the tool as thin as we can. You need to plug it in deep enough.
  • Tep: This set of headphone jack remover tool is considered a single-use tool.
  • If you have any question, please feel free to contact us by email. You don't need to return the product, we can give you a full refund.
Rank No. 8
GripperX Headphone Plug Extraction Tool with Key Ring and Cleaning Brush - Remove Broken Headphone Plug from Headphone Jack of Mobile Devices
  • NO GUARANTEES: This tool comes with no guarantees implied or expressed and should be considered a single-use tool.
  • PURPOSE: GripperX is designed for the purpose of extracting a headphone plug that has broken apart, leaving the tip of the plug lodged inside the headphone jack of a mobile device.
  • HEADPHONE JACKS: Designed to be used on 3.5mm jacks found on phones, laptops and smaller devices.
  • HOW TO USE: Insert GripperX between headphone jack housing and broken plug. You may need to lightly tap it in. It should go in about the same length of the headphone plug. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove. Restore functionality to your device's headphone jack.
  • USE WITH CAUTION: Rotating or inserting too far may damage the device. The opening is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
Rank No. 9
Headphone Plug Extraction Tool - Headphone Jack Removal Tool, Tube Grip Stick Puller, Jack Remover - 4PC
  • PRODUCT COMPOSITION: This headphone extraction tool kit includes two short and two long laser cutting mini stainless steel pipe. These stainless tubes have different thicknesses, slits and cutting angles which can handle a variety of different repair situations. Applicable to all models of mobile phones, pads and computers with 3.5mm headphone jack.
  • 30 SECONDS EXTRACTION TOOL: You can use this headphone jack extraction tool to easily remove the broken headphone plug within 30 seconds. This headphone plug extraction tool will save you from spending 3 hours on a round trip to a professional repair store. Taking Care of Your Money! At least 20 bucks will be saved.
  • HOW TO USE: Use the short one first! Insert it into the headphone jack hole. Place the phone or pad upright and press the tube against the table. You'd better put a book underneath to prevent scars on the table. Rotate the tool when you can't press it in.
  • HOW TO USE: Gently downward to feel the extraction tool grab the broken headphone plug. Then tighten the end of the tube with hands or pliers and pull it out. If the broken plug is not all taken out, proceed with the long one headphone jack remover.
  • GUARANTEES: This set of headphone removal tool is considered a single-use tool. But we offer a 100% satisfaction guarantee. If you are not satisfied with our tool kit, please take a picture and contact us for a FULL REFUND.
Rank No. 10
Headphone Plug Extraction Tool- Remove Broken Headphone Plug from Headphone Jack of Mobile Devices/Tablet or Any Other Equipment with 3.5mm Earphone Hole.
  • ??IMPROVED DESIGN: One end of our small stainless steel tube has a 60 degree cut angle, and the tube wall is very thin, which makes it easier for you to insert tools into the headphone hole and take out the broken headphones. Our package provides 7 such stainless steel gadgets for you.
  • ??HOW TO USE: Insert the tip end of steel tube between the headphone jack and a broken plug. You may need to lightly tap it in. It should go in about the same length as the headphone plug. Normally 0.55 inch. Pinch with fingers or pliers for better grip. With broken plug enclosed, pull to remove.
  • ??GUARANTEES: This tool considered to be a single-use tool. So we supply seven headphone plug extraction tools for you. But if you can’t solve your problem with this tool, you can get a full refund without a return.
  • ??USE WITH CAUTION: Inserting too far may damage the device. The pointed end of the tube is sharp and may cause harm to your fingers. We recommend using gloves and pliers when handling this tool.
  • ??GIFT: The headphone jack cleaning brush in the package is a gift.
  • Compatible devices: Cellular Phones

How Do You Buy The Best Headphone Plug Extraction Tool?

Do you get stressed out thinking about shopping for a great Headphone Plug Extraction Tool? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Headphone Plug Extraction Tool, which is why we have assembled a comprehensive list of the greatest Headphone Plug Extraction Tool available in the current market. We’ve also come up with a list of questions that you probably have yourself.

We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Headphone Plug Extraction Tool that you consider buying. Your questions might include the following:

  • Is it worth buying an Headphone Plug Extraction Tool?
  • What benefits are there with buying an Headphone Plug Extraction Tool?
  • What factors deserve consideration when shopping for an effective Headphone Plug Extraction Tool?
  • Why is it crucial to invest in any Headphone Plug Extraction Tool, much less the best one?
  • Which Headphone Plug Extraction Tool are good in the current market?
  • Where can you find information like this about Headphone Plug Extraction Tool?

We’re convinced that you likely have far more questions than just these regarding Headphone Plug Extraction Tool, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.

Potential sources can include buying guides for Headphone Plug Extraction Tool, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Headphone Plug Extraction Tool. Make sure that you are only using trustworthy and credible websites and sources.

We provide an Headphone Plug Extraction Tool buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Headphone Plug Extraction Tool currently available on the market.

This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:

  1. Brand Value: Every brand of Headphone Plug Extraction Tool has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Headphone Plug Extraction Tool?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: This simply is how much bang for the buck you get from your Headphone Plug Extraction Tool.
  5. Customer Ratings: Number ratings grade Headphone Plug Extraction Tool objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Headphone Plug Extraction Tool.
  7. Product Quality: You don’t always get what you pay for with an Headphone Plug Extraction Tool, sometimes less, and sometimes more.
  8. Product Reliability: How sturdy and durable an Headphone Plug Extraction Tool is should be an indication of how long it will work out for you.

We always remember that maintaining Headphone Plug Extraction Tool information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.

If you think that anything we present here regarding Headphone Plug Extraction Tool is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here. Or You can read more about us to see our vision.

Leave a Comment

Your email address will not be published. Required fields are marked *